CMD Commands
1.systeminfo
Displays detailed configuration information about a computer and its operating system, including operating system configuration, security information, product ID, and hardware properties (such as RAM, disk space, and network cards).
2.wmic bios get serialnumber
If you are looking to find BIOS serial number from CMD, then wmic bios is the command you would need. Below is the exact command you can run on any Windows computer to retrieve serial number.
3.ipconfig/all
Displays all current TCP/IP network configuration values and refreshes Dynamic Host Configuration Protocol (DHCP) and Domain Name System (DNS) settings. Used without parameters, ipconfig displays Internet Protocol version 4 (IPv4) and IPv6 addresses, subnet mask, and default gateway for all adapters.
4.getmac
media access control (MAC) address and list of network protocols associated with each address for all network cards in each computer, either locally or across a network. This command is particularly useful either when you want to enter the MAC address into a network analyzer, or when you need to know what protocols are currently in use on each network adapter on a computer.
5.tasklist
Displays a list of currently running processes on the local computer or on a remote computer. Tasklist replaces the tlist tool.
6.oskFor open on screen keyboar
7.hostname
Displays the host name portion of the full computer name of the computer. Important. This command is available only if the Internet Protocol (TCP/IP) protocol is installed as a component in the properties of a network adapter in Network.
8.taskmgr
Windows has shortcut commands which can be used from Run to launch applications quickly. Run command for opening 'task manager' is taskmgr .
